Insulation Resistance Tester, Linear Leakage Current Sensor Rogowski Coil Current Sensor 630mm Flexible Coil Current Sensor FR200R

Feature:-Range: 0A～10kA-Output: 100mV/1kA (optional integrator can be customized to output other parameters)-Diameter: φ200mm Length: 630mm-Accuracy: 1%-Connector: BNC optional banana audio Specification:Function：Test AC leakage current, high current, high harmonic current, complex waveform current, transient inrush current, phase, power, power, power factor, etc.Test mode：Flexible CT: The output signal is the current-to-time differential. By integrating the output voltage signal, the input current can be truly restored.Coil diameter：φ8mmRange：0A～10kAOutput：100mV/1kA(Optional integrator can be customized to other parameter output)Resolution：0.1AAccuracy level：±1.0%FS (50Hz/60Hz)；23℃±2℃，below 70%RH，the wire is at the center of the coil)Phase error：≤1°(50Hz/60Hz；23℃±2℃)Initial phase：90°Output interface：BNC connector (optional audio , banana , bare wire)Output line length：2mElectric field interference：No hysteresis effect, no external electric field interferenceWire position：The tested wire is at the center of the coil, and the position error affects：≤±0.3%FSResponse frequency：0.1Hz～10MHzLine voltage：Tested below AC 1000VWorking temperature and humidity：-20℃～50℃；below 80%rhStorage temperature and humidity：-10℃～60℃；below 70%rhInsulation strength：AC 2000V/rms(Both ends of the coil)Package List:Flexible coil current sensor X 1

• -There is no hysteresis effect, the phase error is almost zero, there is no magnetic saturation, and the linearity is good. The output signal is the difference between current and time.
• -By integrating the output voltage signal, the input current can be truly restored, and the measurement current range can be from milliamps to millions of amperes.
• -Mainly used for the detection of AC leakage current, large current, high-order harmonic current, complex waveform current, transient surge current, phase, electric power, power, power factor, etc.
• -FR100R flexible coil current sensor coil part has no exposed metal conductors, non-contact measurement, safe and reliable; small size, light weight, exquisite appearance, soft and flexible, suitable for narrow environments and dense cables
• -Easy to integrate into other equipment, such as: electric energy meter field calibrator, multi-function electric energy meter, oscilloscope, digital multimeter, cable identification instrument, cable fault detector, double clamp ground resistance tester, double clamp phase voltmeter, digital Current recorders, etc., can measure and compare various electrical parameters in an uninterrupted state.